Panel and service upgrades in Rockford
Last reviewed November 18, 2026 against City of Rockford sources.
A panel replacement or service upgrade is the Rockford job where local rules matter most. The City adopted the 2020 National Electrical Code with local amendments effective January 1, 2025 (Ordinance No. 2024-175-O), and several amendments apply directly to service equipment. Two quotes for "a new panel" can differ a lot depending on whether they include them. (City of Rockford local amendments)
Rockford rules that apply to panel and service work
The whole service comes up to current code. Rockford added NEC section 230.11: "When any part of the service entrance equipment, branch circuit panel, or service conductor is replaced, modified, or required to be repaired, the service in its entirety must be installed to comply with the current codes." The only listed exception is replacing or adding a branch-circuit breaker or fuse.
At least 16 spaces. The same section says the main branch circuit panel "shall be at least 16 spaces."
No tandem breakers in new panels. Rockford's amendment to NEC 408.54 says newly installed panelboards "shall not have tandem breakers or similar breakers." Plan for enough full-size spaces.
Overhead service conduit. Overhead service-entrance conductors are limited to rigid metal conduit (RMC) or intermediate metal conduit (IMC), with EMT allowed inside the building (amended 230.43).
Disconnect location. The service disconnect must be readily accessible, either outside or inside "at or within 5 feet of the meter enclosure" (amended 230.70(A)(1)).
Grounding. A single rod, pipe or plate electrode must be supplemented by a second electrode unless it measures 25 ohms or less to earth (amended 250.53(A)(2)).
Surge protection is not a City requirement. Rockford's amendments delete NEC section 230.67, the 2020 NEC rule that would otherwise require a surge-protective device on dwelling services. A whole-home surge protector can still be an option you choose; ask whether it is in the quote.
Permits and inspections
Service work needs an electrical permit. The City's electrical permit application asks for the service size (amps, voltage and phase) and whether the service is new, a replacement or upgrade, or temporary. For hired work it is submitted by a City of Rockford registered electrician. (Forms and applications)
The City lists an Electrical Service inspection among its electrical inspections, and the permit must be posted where it is visible from the street or at the main entrance before work begins. Inspections are requested at least one full business day (24 hours) ahead. (City of Rockford: Electrical Permits)
The utility side
ComEd is the main electric delivery utility in Rockford (your bill names yours). ComEd's construction and remodeling guidance says to work with your electrician on the project details and then apply to ComEd for new or changed residential service, after which ComEd assigns a project lead. If the job changes the size of your service, your contractor should tell you who handles the ComEd request and how long it may take. (ComEd construction and remodeling customer process)
What to ask before you sign
- Does the price include bringing the entire service up to current code under Rockford's 230.11, or only the panel?
- How many spaces will the new panel have, and does the layout work without tandem breakers?
- Is the overhead mast or service conduit being replaced, and is it RMC or IMC?
- Who applies to ComEd, and who pulls the City permit? What is your City of Rockford registration number?
- Is a surge-protective device included, and is it optional?
See Rockford costs for the City fees that apply and how to check a contractor.
Questions
Do I need a permit to replace an electrical panel in Rockford?
Yes. The City requires electrical permits to install, alter, replace or convert electrical systems. Its exemption list covers replacing a breaker or fuse of the required capacity in the same location, not replacing the panel.
Why is a Rockford panel job sometimes bigger than expected?
Rockford's local section 230.11 says: "When any part of the service entrance equipment, branch circuit panel, or service conductor is replaced, modified, or required to be repaired, the service in its entirety must be installed to comply with the current codes." The only listed exception is replacing or adding a branch-circuit breaker or fuse.
Does Rockford require a whole-home surge protector?
No. Rockford's 2025 amendments delete NEC section 230.67, the surge-protective-device requirement for dwelling services. You can still choose to add one.
Can a new Rockford panel use tandem breakers?
Not in a newly installed panelboard. Rockford's amendment to NEC 408.54 prohibits tandem or similar breakers in new panels.